|
| Subscribe to PhilaFCPUG.org Meeting Mailing List |
| Visit this group |
On the top right there is a link for the RSS feed
Archives on the right.
Both by category and date.
This column has a google search of this site if there's something you're looking for.
Final Cut Pro News has around for over 2 years (as an offshoot of the Phila Final Cut Pro User's group, http://philafcpug.org)
With over 1000 view a day you'll see posts showing the other User Groups. Communities, places for tips, and the occasional opinion, you won't find a better place for all your proapp needs.
Final Cut Pro: Notes for setting Scratch Disk on Xsan: "Final Cut Pro: Notes for setting Scratch Disk on Xsan
* Don't designate the root level of the Xsan as a Scratch Disk.
* Don't share the same Scratch Disk location between two or more users.
Ideally, each....
More at the Jump
2degsnow Mac EtherDrive® Storage Hardware
Mac EtherDrive® ATA-over-Ethernet (AoE) Storage appliances, built on Coraid technology, publish single disks or RAID sets on the network where they can be accessed by Mac Workstations or Xserves.
The Mac EtherDrive® Storage products deliver almost unlimited networked storage capacity with a cost lower than that of other networked storage technologies available for the Macintosh.
With the advantages of a lower cost, GigaBit Ethernet infrastructure, but without the overhead of TCP/IP, the Mac EtherDrive® Storage is a clear winner over technologies such as iSCSI and FibreChannel in providing low-cost, simple to deploy, scalable networked storage for Mac. Details...
Raids, 0,1, 5 and 10Granite Digital Ships G5 Macintosh SATA Dual Drive Internal Mounting Kit: "Granite Digital, a leading manufacturer of SATA, FireWire, and SCSI storage solutions, today announced it has begun shipping a SATA Dual Drive Internal Mounting Kit for the G5 Apple Macintosh capable of addressing 1.5 Terabytes in either JBOD, RAID 1, or RAID 0 configurations. Support for both the older (PCI) model G5 and the newer (PCI-e) is provided in two separate models. All SATA I and II drive mechanisms are supported at speeds up to 300MB/s per channe"
(Via http://www.applelinks.com .)
Final Cut Pro: Read Prefetch settings for Xserve RAID: "If you are using an Apple Xserve RAID for video in high data rate formats (such as Uncompressed SD formats or HDTV formats), a Read Prefetch setting of 128 stripes (8 MB) is recommended."
